Best Fencing Companies in United States

Recently, I had Lev replace my RV gate and the wood slats on a smaller gate.  The finished product looks amazing - the wood slats were replaced with composite material.  

I highly recommend using Lev for your gate needs!

Thurman just finished putting in our security screen door. We love it. We were very happy with his installation and he helped with some adjustments we needed. Aaron was a very helpful sales person.

Abraham did such a great job on repairing 25 feet of our back fence facing the Arrowhead Golf course, prompt and perfectly matched. If you live in the Arrowhead HOA I highly recommend him for any work you may need.

Put up my mom's pool fence so we can feel safe when our kids are over and you guys were great. A compliment due to you guys. Thank so much for being respectful and promptly finished the job.

WOW, what a great experience.  Shawn McPeters came out and knew exactly what I wanted.  Today John came and installed my door.  This company is amazing and thank you so much for doing such a beautiful job and having quality product.

Alex and his crew did a phenomenal job on our side gate and sliding RV gate. Everything is custom, and comes with a quality guarantee. They managed to get everything done less than a month after hiring, plus hauled away the old rickety gates at no charge. We even had a hole in our metal awning on the new place we bought, and with rust running through, and they managed to patch that up. Needless to say, if I have ANY welding needs, I'll be calling him. Well worth going with the little guy over one of the bigger companies.

Sebastian did a gate repair on my backyard alley gate, it was very efficient and clean.  They were in and out in no time, very professional & highly recommended!

Needed to replace an old wooden fence. Gathered 5 quotes, decided to go with this company based on the other great reviews. Also, Juan was courteous and professional right from the start. Great communication, answered all of my questions and was always on time. The entire process was a breeze, very impressed. And just look at that beautiful fence!! Installing the gate didn't take too much time, and they left my yard free of debris.

Paul brought his mobile welding service to our home for exterior gate door repair. He fabricated a new bottom railing to replace a badly rusted one. He replaced several rotted out boards and door hinges, replaced the latch, and then reinforced all remaining hardware. Very satisfied with the finished product and the quality of his work. Paul was prompt with communicating, arrived on time, and a very good craftsman. Highly recommend him.

Alex and Michael arrived on time at 8 am July 13, 2020 to put kickplate under my RV gate to raise it to the level that I added onto my block wall years ago, which is another 13 inches.  Alex is particularly cheerful and upbeat.  

I was feeling sorry for them that they had to work in 118 degree heat, but they had their setup, which really impressed me, that I took this picture.  A large EZ up with misters!!  I never seen any worker bring such a thing.  

Gate Repairs was willing to match the $350 bid that I got from several other gate businesses (maybe even this same business)  several years ago, but never acted on it.  I did not tell them that my lowest bid this year was $400, but they wrote back that they were willing to match the $350 I got from the past.  I was elated.  I got a bid as high as $1200 from one gate company, and that was only if I put kickplate on top of the gate not at the bottom!

So make sure you get several bids, folks, cos they could be $1000 apart.  

It was hard to get bids on this project because the other gate companies only make new gates, or they do not come out to the job site to install what they make in the shop, due to not being licensed to do installations on site.  

At first they welded the plate on top of  the frame, not inside the frame.    I didn't like that at all, and they already painted it.  They said they didn't weld the plate inside the frame so it looks same on both sides, cos the plate has a tendency to warp.  It is such a little area, like 1 foot high.  I said you could put enough welds in it, even all the way around, not just spot welding here and there, so the plate won't warp.

So they took apart what they did. on that one side, and put metal plate inside the frame, and got my approval.  Sooooo much better!  
Otherwise I would have looked at that plate on the outside of the frame (like a piece of cardboard taped there) and had bad feelings every time I look at it, and for years.  Alex said I just want you to be happy.  I said I was happy with the changes they made.  He said some people like the panel on this side, some like it on the other side.  I said Well you didn't ask me first.  I told him I think they should have asked me.  Maybe they will ask people from now on to avoid having the cost of time and materials to do it over.  .  

I don't know why I put off this gate modification for so long, but I love the Covid quarantine   I got home projects done during this time that I been putting off for 16 years!  

While working, Alex told me they could replace existing wood slats, which  too are too small  for the opening (cos lazy person, not me, buys them ready cut that way, no need to rip each slat) .  Existing wooden slats leaves large gapes in metal frame that people could see me skinny dip in my pool easily   Wood has to be custom ripped to fit between metal, so people cannot see through.  Gate Repairs will paint the wood for me, too.  Alex said he will call Areceli to give me a quote for that.  

On July 30, a different person named Adam showed up with the same Michael who came with Alex on July 18, to replace my gate slats with wider boards so the 1/4 opening on each side no longer exists between the board and the metal frame grid.

They stained the wood at their shop with the Behr Redwood stain 502 I told them to get, and cut it onsite and installed.  Cost $560 after a $100 previous customer discount.

I noticed paint drops and overspray on my brick paving and the concrete.  But Adam insisted that their paint (in spray can) does not make drops like that, but there was also 25 inches overspray you can see in the photo.  Adam said he and Michael painted in the alley, not where the drips are.  No one coulda done that but the gate workers, which Adam said could have been done by Alex last time.  They did not have the right solvent to remove the paint drops so I got my nail polish remover, which well, didn't get it all out, but made a difference.  Areceli at the office both called and emailed me offering for someone to come out again with the right solvent to remove the paint from my pavers, after the guys told the office they did not have the means to remove the paint.

After they left I worked on it for several days with remaining nail polish remover.  I got it out enough so it isn't as noticeable that I could live with, so they do not have to come back again.  But that is why I give them 5 stars, because they were conscientious to come out again to make it right.  

I tell you I really like Alex, the company has a big asset in his upbeat, enthusiastic, cheerful, yes and  I just want you to be happy personality.  I felt Adam was the opposite.  

Here are pictures of raised gate, neat latches they put on free, and their impressive work tent with fans and misters.

The wrought iron fence that we had installed was done well. However, the painting of it was not. I am doing my 2nd major touch-up in less than 2 years since it was installed in May of 2018. They also came back once to touch it up after 10 months of installation, which makes 3 times. However, there is only a one year guarantee. I am going to have to have the fence completely repainted in the near future and it is not a small fence. Buyer beware.

Appreciate the communication of Geoff , the ease of scheduling and timelessness of the work performed. The gate looks great and accomplished what i was seeking which was a complete slat replacement with colored composite wood to ensure good looks through rain or shine.   Thank you Geoff and his partners for doing a great job.

They couldn't help me but gave me advice on who to call t get the wrk done that I need.

4 days from the first call to the installation of beautiful new side gates. I am thrilled with the product and whole process!

Mike Stoker and his team at Steel Creations are the finest steel fabrication shop in phoenix.  They have done work for myself and many of my friends.  True custom work is their specialty.  If you are looking for gates, pool fences, front security doors or most anything else made out of steel.  

All my friends who have used Mike love him and the work his firm has done.

Clear Choice did our pool fence when we moved in a year ago, and thankfully he was able to come very quickly to get it up! A few months ago our friends dog ripped a hole in one of the panels and he came out and repaired it within a week just in time for my husband and I to host an event. Quality service and the nicest guy ever. Highly recommend!

Great company with a lot of integrity. Fast response and very helpful.

We had our fence put in months ago (it looks great!) and had two unfortunate issues - broken pole and rusty fastener - but i called Tim and Gina quickly got back to me to schedule fixing the problems the next day, on a holiday week none-the-less! Way beyond expectations.

I had Hernandez make a custom RV Gate for me and I am truly impressed.  Everything done was top notch.  Everytime someone comes over, they mention how nice my gate looks.  You get for what you pay for and if you want quality, one-of-a-kind, look no further, excellent craftsmanship.

I had at least half a dozen architects and contractors look at our master suite project, but none of them had the skill, vision, or knowledge of Sacred Steel AZ.  From understanding how to preserve the original block (I had master masons tell me that wasn't possible), to knowing the structural constraints of the wall, to working within the overall aesthetics of our home, Gabe Castle demonstrated professional expertise that surpasses his competitors.  He worked meticulously on every detail of our slider door to ensure a perfect, unique final product.  He also took time to collaborate with me about different decisions during the process.  Sacred Steel did all of this for a fraction of the price of other bids...and for 100% custom work!  The true beauty and quality of this project has far exceeded my expectations for only a fraction of the price.  Now I'm eager to see how Sacred Steel can blend more steel features across the exterior of the home.

Sounds like they build great gates and was excited to work the this company but I have waited a month just to get someone to come out for measurement!  I called to check in on a status 2 weeks ago and Carol reached out saying I was still on the wait list and could not schedule and appointment for me. It has now been a month and I have decided to go with another company as I can't wait over 4 weeks just for a measurement and price!