Best Garbage Disposal Installation in San Francisco CA
Ted fixed problems with 4 different doors in my condo. He thought more work might be required on two of them (and a lot of work on one of them), but they're all working perfectly. Can't ask for much more than that - great experience.
San Francisco, CA
I contacted Berkeley Home Repair based on the Yelp reviews and I couldn't be happier! From the time I called and spoke with Damon to inquire about an estimate through the installation of the new toilets has been a great experience. I had two toilets installed and the price was very reasonable. Brian arrived exactly on time and even gave me time to paint the wall that I couldn't get to when the old toilet was in the way. Brian was very friendly and explained what he was doing and asked important questions to make sure that the toilets were installed to my liking. I will be contacting Berkeley Home Repair again for future household repairs/remodeling needs.
Richmond, CA 94806
Yevgeny was extremely helpful! I called him about our leaking kitchen sink and after texting him photos of the pipe, he was over within 15 minutes. He found and fixed the problem within another 15 minutes. We'd definitely hire General SF again!
3624 Irving St, Ste A, San Francisco, CA 94122
Oscar was prompt and very knowledgeable which helped us in picking the right light fixtures He did an excellent job installing a new switch and 2 fixtures. He's fast worker and cleans up after. We'd hire him again.
San Francisco, CA 94110
Texted, no follow up. I'm pretty sure he's a busy guy but a yes or no would be nice. We ended up DIY-ing the project anyways.
San Francisco, CA
I am impressed with the work of Beder. He is efficient and cleans up after the work. He has installed 2 different TVs on drywall, built floating book shelves in my home office, and built a cabinet to holder my HP printer.
He follows Covid safety precautions. I will contine to use his expertise in the near future.
He follows Covid safety precautions. I will contine to use his expertise in the near future.
San Francisco, CA
Ben totally saved the day!
We suffered a break-in attempt yesterday morning, which ended up damaging our building's front door frame to the point that it would no longer lock. This obviously needed to get fixed ASAP and I knew that same day availability for a big job like this would be a challenge. Luckily I found Ben's page and gave him a call. He was able to fit me into his afternoon and worked until sundown to get the door frame repaired with new lumber and reinforced. He was polite, helpful, and a total pleasure to work with, and we went to bed soundly knowing that the front door was now even more secure than it was before the incident. Thanks again Ben!
We suffered a break-in attempt yesterday morning, which ended up damaging our building's front door frame to the point that it would no longer lock. This obviously needed to get fixed ASAP and I knew that same day availability for a big job like this would be a challenge. Luckily I found Ben's page and gave him a call. He was able to fit me into his afternoon and worked until sundown to get the door frame repaired with new lumber and reinforced. He was polite, helpful, and a total pleasure to work with, and we went to bed soundly knowing that the front door was now even more secure than it was before the incident. Thanks again Ben!
San Francisco , CA 94118
Ongaro and Sons just installed a new furnace for us and were very professional, courteous and timely from the beginning to conclusion of the job. I would certainly call on them again and highly recommend them to others.
11 Ross Ave, San Anselmo, CA 94960
I reached out to Ted while looking for a handyman to replace an old vanity, wall cabinet, and mirror in our bathroom. He was very responsive and generous with advice on where to get materials and what kind to get even before I had hired him.
Once on site, I found him to be super friendly, adaptive, and communicative. The project ended up increasing in scope (including tearing out and replacing some drywall) because of unforeseen circumstances. (It's an old house, so honestly I went in expecting a surprise or two.) Ted was great about laying out the options, being mindful of the unexpected increase in cost. Throughout the process I felt I was kept in the loop and consulted on all the decisions I wanted to be consulted on.
This was my first experience with a handyman and I'll definitely be calling Ted when I need one again.
Once on site, I found him to be super friendly, adaptive, and communicative. The project ended up increasing in scope (including tearing out and replacing some drywall) because of unforeseen circumstances. (It's an old house, so honestly I went in expecting a surprise or two.) Ted was great about laying out the options, being mindful of the unexpected increase in cost. Throughout the process I felt I was kept in the loop and consulted on all the decisions I wanted to be consulted on.
This was my first experience with a handyman and I'll definitely be calling Ted when I need one again.
San Francisco, CA
Needed a refrigerant recharge - they told me on the phone that the $89 diagnostic fee will be applied against the repair.
Appointment set up was easy, but once the tech Adrian arrived everything started going south quickly..
I told him I need a recharge, but he wanted to check, so he cut insulation on one of the pipes about 4 long(never seen this before!!!??)...few mins later went on to state what I already told him - that I need a recharge.
Instead of promptly quoting me, he went on to give me a sales pitch about how techs should get paid more etc..there are not too many good techs in the area, other companies techs are not trained/re-trained enough...I already started sensing that he was setting me up for a high quote..
Then he hit me with the numbers $735 for 6-8lbs of 410a refrigerant..that works out to $92-$122/lb of 410a!!!! I decisively asked him to wrap up, since I knew it should cost no more than $20-$30/lb..he started to get very defensive and arguing with me about prices..like Im lucky to be getting these prices, everybody charges these prices etc etc.. at some point he even said, do u think I should be paid like somebody flipping burgers - at that point I told him there was no point in continuing the conversation and have the office invoice me for the $89...he insisted he do the billing, I really wasn't even comfortable handing him my credit card after the way the conversation was going - but I let him charge it anyway...$89 for 15-20mins of work..or non-work in this case, not bad - and I don't think anyone made that much flipping burgers! So not sure how he drew that comparison.
Overall - a very negative experience, the outrageous pricing was part of it, but the defensiveness of the tech was another part of it as well - he told me several times that he is constantly retraining, well some retraining on customer interfacing is definitely in order!
If the customer doesn't like your pricing, either offer better/reasonable pricing or just let them do their own thing!
Also checked my surveillance tapes to review what he was doing and noticed that he kept leaning with his body weight on one of the pipes to get up...Im just hoping he didn't damage that pipe and cause a leak that didn't exist in the first place..
Btw if you Google R410a, you'll see several buying options at ~$100 for 25lbs!!!! So $4/lb, - their cost is probably even lower buying in bulk.
So, all you yelpers who just need an AC recharge, call several companies, ask them BEFORE they send out their tech what they charge per lb of refrigerant..and save yourself some time, money and a headache!!
Appointment set up was easy, but once the tech Adrian arrived everything started going south quickly..
I told him I need a recharge, but he wanted to check, so he cut insulation on one of the pipes about 4 long(never seen this before!!!??)...few mins later went on to state what I already told him - that I need a recharge.
Instead of promptly quoting me, he went on to give me a sales pitch about how techs should get paid more etc..there are not too many good techs in the area, other companies techs are not trained/re-trained enough...I already started sensing that he was setting me up for a high quote..
Then he hit me with the numbers $735 for 6-8lbs of 410a refrigerant..that works out to $92-$122/lb of 410a!!!! I decisively asked him to wrap up, since I knew it should cost no more than $20-$30/lb..he started to get very defensive and arguing with me about prices..like Im lucky to be getting these prices, everybody charges these prices etc etc.. at some point he even said, do u think I should be paid like somebody flipping burgers - at that point I told him there was no point in continuing the conversation and have the office invoice me for the $89...he insisted he do the billing, I really wasn't even comfortable handing him my credit card after the way the conversation was going - but I let him charge it anyway...$89 for 15-20mins of work..or non-work in this case, not bad - and I don't think anyone made that much flipping burgers! So not sure how he drew that comparison.
Overall - a very negative experience, the outrageous pricing was part of it, but the defensiveness of the tech was another part of it as well - he told me several times that he is constantly retraining, well some retraining on customer interfacing is definitely in order!
If the customer doesn't like your pricing, either offer better/reasonable pricing or just let them do their own thing!
Also checked my surveillance tapes to review what he was doing and noticed that he kept leaning with his body weight on one of the pipes to get up...Im just hoping he didn't damage that pipe and cause a leak that didn't exist in the first place..
Btw if you Google R410a, you'll see several buying options at ~$100 for 25lbs!!!! So $4/lb, - their cost is probably even lower buying in bulk.
So, all you yelpers who just need an AC recharge, call several companies, ask them BEFORE they send out their tech what they charge per lb of refrigerant..and save yourself some time, money and a headache!!
63 Bovet Rd, Ste 160, San Mateo, CA 94402
Chris is awesome! We have an old condo and it seems like every time we have work done, it's a huge ordeal. Not this time! We needed a large industrial oven hood installed. Chris gave us options and made it work like a champ. Super professional and friendly. Will definitely use Divine Electrical again (and again).
2935 Kerner Blvd, Ste E, San Rafael, CA 94901