Best in Chicago IL
Don't think twice, just hire AC/DC. Stefan provided the lowest quote and was able to come out the very next day. He was extremely prompt and communicative. We had an issue with the ladder being too short, but he found a ladder that would work, was back the very next day and got the job done. I could not be more pleased with his work, and will definitely call him again next time.
Chicago, IL
All The high ratings are valid. No bullshit with this group. Courteous, on time, fair price, easy to work with. Top notch.
Chicago, IL
Fast service, friendly, knowledgable technicians:
I'm the president of our condo association and we needed some electrical work done all around our building- inside and out. Their office was quick to schedule, gave me flexible dates, and stayed on top of emails. Technician Rodrigo was kind, professional and got the job done fast. I'll be using them again for safety light installments once our back decks are done being constructed. If you need good work done at a fair price look no further.
I'm the president of our condo association and we needed some electrical work done all around our building- inside and out. Their office was quick to schedule, gave me flexible dates, and stayed on top of emails. Technician Rodrigo was kind, professional and got the job done fast. I'll be using them again for safety light installments once our back decks are done being constructed. If you need good work done at a fair price look no further.
3344 W Irving Park Rd Chicago, IL 60618
Ted is the best, fit us into a very busy schedule and did great work as always. Gets the job done quickly and right and at a great price. Highly recommended A+++
Chicago, IL
This was the second visit from Joe. This time it was an additional light and switch I needed installed in a closet. Joe came out less than 24 hours later, had everything required for the installation, and very quickly had the service run and the switch and light installed. I highly recommend Joe for any electrical work in your home.
Brookfield, IL 60513
Christian was responsive and professional. He fixed the issue quickly and within 24 hours of requesting the quote on Yelp.
Berwyn, IL 60402
I live in a real old house in Oak Park, tried to replace the possibly just as old light fixture on the porch myself and ran into a lot of rust and stripped wires and stuff I was not expecting so I knew I needed professional help. Edward at Greenline had Esteban out here in just a couple of days (would've been even sooner if I was available) and the job took 15 minutes and it looks great!
Chicago, IL
Ryan is professional, kind and a knowledgeable electrician. He is fast to respond and is often able to come the same day. I highly recommend him- he is our go-to electrician.
Chicago, IL
I required a list of items I needed addressed, as well as trouble shooting additional items. Boz came out at the scheduled time, listened to my needs and pointed out some additional items to meet code. He included all items in his estimate, as well as the trouble shooting items. I had three companies come out for estimates, I found it interesting how the prices varied so much. The crew came out on the scheduled dates, took care of everything. The quality of work was outstanding. This is a partial list of the items needed
Multiple GFCI outlets, trouble shot and repaired in bath and kitchen. As well as new ones to meet code. Including replacing sump pump outlet with GFCI code required outlet on separate circuit. Exterior GFCI replacement on separate circuit.
Replacement of overloaded panel with larger one, there were no open slots.. Resolving circuits that were overloaded. New wiring to the new circuits with minimal movement of wall covering (panels).
Replacing BX cables with wiring in pipes, Moved junction boxes to better positions.
Extremely happy with work.
Multiple GFCI outlets, trouble shot and repaired in bath and kitchen. As well as new ones to meet code. Including replacing sump pump outlet with GFCI code required outlet on separate circuit. Exterior GFCI replacement on separate circuit.
Replacement of overloaded panel with larger one, there were no open slots.. Resolving circuits that were overloaded. New wiring to the new circuits with minimal movement of wall covering (panels).
Replacing BX cables with wiring in pipes, Moved junction boxes to better positions.
Extremely happy with work.
Chicago, IL
Steer Clear. This is not a legitimate electrical company. Gave me an estimate and did the electrical work for an EV charger in our condo building. Even though building management didn't request City of Chicago license initially, they checked for it later (it can be asked for at any time) and this company is not licensed in the City of Chicago and its illegal to do residential work without it. The job was done completely wrong and he almost blew the sump pump and electrical to entire building by connecting to a panel inexplicably and was told not to. Installed wiring that was bent and broken and taped together which could have caused shocks and burning. New contractor easily installed it - no bends or breaks. The wall outlet installed was open and exposed, and if water dripped to it could electrocute people. Sloppy, cut corners, dangerous, illegal and not up to code. Absolute garbage, rushed work. Refused to get City of Chicago license and come fix job. We will be pursuing our money back. This is an illegitimate electrical company. Avoid at all costs.
Addendum to review:
Right, I'm not an electrician , but here are couple facts that a real electrician should have known and done, that found out about your job.
You were told by the building engineer to use the 480/277 volt panel because 208/120 was already at the capacity.
You just plainly ignored that and proceeded with your version. Maybe you don't know the difference between two.
You ran 208/ 120 wires through 480/277 panel which was a huge code violation and a human life safety issue.
And that's not all:
Then you spliced those wires inside that panel multiple times -- code violation.
You then decided to use lightning contractor conduit to run the wires and overfill that conduit -- code violation.
You installed the breaker at the wrong panel (which was at capacity) so you overloaded that panel.
The wire was badly scraped
You removed pipe straps and made the electrical conduit loose -- code violation.
J boxes that you installed were unsecured and loose with knock outs missing -- code violation
I'm still waiting on the city of Chicago electrical registration paperwork from you.
A qualified electrician would know right away that he is working with 480/277 volts and would have informed me that i needed a step down transformer in order for the EV charger to work!
On top things you have charged me over $2K for 2 J boxes and a roll of #6 wire, which costs $600 at the most. The piping was already 97% there , so what took you so long.
It took a qualified electrician a total of 8 hours to remove the faulty work and install everything from scratch including installing the transformer.
We'll happily accept a refund to settle this matter
Addendum to review:
Right, I'm not an electrician , but here are couple facts that a real electrician should have known and done, that found out about your job.
You were told by the building engineer to use the 480/277 volt panel because 208/120 was already at the capacity.
You just plainly ignored that and proceeded with your version. Maybe you don't know the difference between two.
You ran 208/ 120 wires through 480/277 panel which was a huge code violation and a human life safety issue.
And that's not all:
Then you spliced those wires inside that panel multiple times -- code violation.
You then decided to use lightning contractor conduit to run the wires and overfill that conduit -- code violation.
You installed the breaker at the wrong panel (which was at capacity) so you overloaded that panel.
The wire was badly scraped
You removed pipe straps and made the electrical conduit loose -- code violation.
J boxes that you installed were unsecured and loose with knock outs missing -- code violation
I'm still waiting on the city of Chicago electrical registration paperwork from you.
A qualified electrician would know right away that he is working with 480/277 volts and would have informed me that i needed a step down transformer in order for the EV charger to work!
On top things you have charged me over $2K for 2 J boxes and a roll of #6 wire, which costs $600 at the most. The piping was already 97% there , so what took you so long.
It took a qualified electrician a total of 8 hours to remove the faulty work and install everything from scratch including installing the transformer.
We'll happily accept a refund to settle this matter
Chicago, IL
Jose and Rodney were absolutely great to work with. Not only did they do an amazing job, but it was all for a great price. They were tasked with replacing our track lighting with recessed lights, as well as, patching any holes and repainting our entire ceiling. We are beyond satisfied with their work and would recommend them to anyone who needed any sort of electrical or painting work done.
Chicago, IL 60616
We have used Jake over the years for all of our electrical needs. He is absolutely amazing and always works incredibly hard and fast. If you are looking for surround sound, new canned lighting, rewiring or all of the above, he is 100% the man for the job!
Chicago, IL
Neville was super quick to respond and very clear about cost. Johnny was punctual, reliable, and did a great job. Will definitely continue to use their services in the future!
1341 W Fullerton Ave Ste 146 Chicago, IL 60614
Can't say enough good things about Kinetic Energy! Their communication and customer service are always on point. We've used them for our electrical needs in our own home and as an interior designer we recommend them to our clients as well. There quotes have always been affordable and fair. Thanks so much Kinetic!
7459 Franklin Forest Park, IL 60130
A++ in all aspects. I had great pleasure to hire Tom's company for our house project. The project included multiple rooms. Complete Bath and kitchen electrical renovation. Two bathrooms received outlets, switches, can lights and fans. The kitchen received new can lights and outlets. Living room got new can lights. We also added wired smoke detectors throughout the house. Tom was a total professional when he came in for the estimate. Everything was explained so that there were no surprises any time during the project and he made sure that we understood the work that was going to take place. Prices were very competitive, and work was done in the time promised. Tom made sure that everything was done right, to code and left everything clean and spotless. I would definitely hire again. Highly recommended.
Chicago, IL 60634
Outstanding very communicative on time reliable all above in every category. Always answers always explains what is needled and why
237 Poston Rd Willow Springs, IL 60480
Alex responded to my posting quickly, was clear on costs, and came out at 8am the following day as promised. I gave wrong information on parts and he was ready with solutions to salvage the job and gave great advice. Would definitely hire again.
Chicago, IL
Quick response, fast and economical fix. Very friendly, great communication and overall a fine looking solution to a problem that was beyond my capabilities. Thanks!
Chicago, IL